INSUTEX CLOTH Cloth is manufactured by ceramic fiber yarn, Reinforced by E-glass or Stainless steel wire, STB ideal for most high temperature application up to 1260 °C(2300°F) HT temperature application up to 1430°C(2610°F). TYPE STB & HT

ALU-CLOTH Thickness     Width   Length Weave mm inch mm inch meter yard 1.5 0.059 1000 39.37 30 32.8 Plain 2 0.079 3 0.118 5 0.197 25 27.3 Multi-Layer 6 0.236 20 21.9 VEKRAM CLOTH 9 0.354 10 10.9 INSUTEX ROUND BRAID Round braid is dense, high performance ceramic fiber material fabricated from ceramic fiber yarn braided around a core of ceramic fiber rope to form a packing in round section. It is widely used for a broad variety of high temperature gasketing, packing and sealing application. TYPE STB & HT APPLICATION INSUTEX SQUARE BRAID Square braid is dense, high performance ceramic fiber material fabricated from ceramic fiber yarn braided around a core of ceramic fiber rope to form a packing in square section. It is widely used for a broad variety of high temperature gasketing, packing and sealing application. TYPE STB & HT APPLICATION INSUTEX SLEEVING / TUBING Sleeving is plaited from glassfiber, stainless steel wire or Inconel wire reinforced ceramic fiber yarn to form a tubing / sleeving for high temperature protection for tube TYPE STB & HT APPLICATION Cable and wire insulation, hose and cable protection form heat and metal splash, fuel line insulation, piping insulation, door and oven gasketing Internal Diameter: 12-50MM ( 1/2” to 2”) & Customer sizes upon requested INSUTEX TAPE Insutex tape is a cost-effective industrial tape manufactured from ceramic fiber yarn, reinforced by a core of glass filament or stainless steel wire for high strength retention at elevated temperatures. Ideal for most high temperature application up to 1260 °C & 1430 °C. (2300°F & 2610°F) TYPE STB & HT LADDER TAPE ALU-TAPE APPLICATION SELF- ADHESIVE Expansion joint / piping insulation / laminates / gaskets and seals / electrical insulation / welding and stress relieving curtains / lacing tape / filtration media / textile products for personnel protection / radiant heat shields / protection against high temperature / insulation of industrial chimney / gasket and wrapping material / Cable insulation / infrared radiating diffusers / boiler tadpole gaskets / fire protection / pipe hanger insulation INSUTEX 3-PLY ROPE 3-ply rope is high performance rope available in low density (LD) made from ceramic fiber sliver, provide better elasticity, softness and high density (HD) made from ceramic fiber yarn with glassfiber, stainless steel or Inconel wire. TYPE STB & HT APPLICATION Asbestos cord, rope replacement, fireproof wrap and insulation, radiant tube packing for heat-treat furnace, seals for stoves and ovens, expansion joint packing, bulk in tadpole gaskets, gaskets and seals. Diameter: 6-50MM ( 1/4” to 2”) & Customer sizes upon requested INSUTEX TWISTED ROPE Twisted rope is fabricated from ceramic fiber yarn twisted left hand/right hand together to form a rope of specified diameters ranging from 3mm to 50mm, Reinforced by glassfiber, stainless steel wire or Inconel wire. TYPE STB & HT APPLICATIO Expansion joint packing for furnace, gaskets, door seal insulation, crucible lid seals, hot top seal, gasket for vacuum degassing of steel during pouring, tadpole gasket bilk material, replacement for asbestos Diameter: 3-50mm ( 1/8” to 2”) & Customer sizes upon requested INSUTEX PAPER Paper is produced from high purity ceramic fibers. The material is noted for its excellent tensile strength and high temperatures. TYPE STB & HT SIZE Thickness: 1-5 mm (1/24” to 5/24”) Width: 610(24”)/ 1220(48”) mm Length: 10-40 m Customer size upon requested APPLICATION Expansion joint. Fire protection, high temperature gasket, mold linings, ladle Refractory backup, refractory back-up, gasket for any high temperature    INSUTEX BOARD Board are rigid self-supporting insulation products manufactured from ceramic fiber and biners, with vacuum forming process. Insutex board provide excellent high temperature stability, low thermal conductivity, good compressive strength TYPE STB & HT SIZE 900 x 600 x 15-50mm / 600x400x15-50mm / 1000x500x15-50mm APPLICATION Furnace linings, hot gas duct linings, fire protection systems, refractory backup Insulation, high temperature gasket and seals, expansion joint material    INSUTEX MODULE Modules is made from ceramic fiber blanket and it is a lining system designed for high temperature furnace that require corrosion barriers on the shell TYPE STB & HT SIZE Length x width: 305 x 305mm, 405x305mm, 610 x 305mm, 12”x12”,16”x16” Thickness: 100-350 mm Customer size upon requested APPLICATION All furnace linings requiring protective barrier against shell, process heaters,Heat treating furnace, forge furnace, incinerators